[Previous][Next]
How To Check
 
 
EXTENDED STORAGE FUSE SWITCH (IF EQUIPPED)
The following switch may be mounted on the fuse block (Junction Box) for transportation and storage.
Extended storage fuse switch
Type AType BType C
Remove the extended storage fuse switch if it causes the interference when checking fuses.
 
 
How To Extended Storage Fuse Switch ON/OFF
caution
  • Turn the ignition switch OFF when operating the extended storage fuse switch.
  • Under normal conditions, keep the extended storage fuse switch in ON state. Never operate the extended storage fuse switch except when necessary.
  • Type A
    • To turn the extended storage fuse switch OFF, pull it up in direction as shown in the figure.
    • To turn the extended storage fuse switch ON, press it in direction as shown in the figure.
  • Type B
    • To turn the extended storage fuse switch OFF, hold of the switch and pull up in direction as shown in the figure.
    • To turn the extended storage fuse switch ON, press it in direction as shown in the figure.
  • Type C
    • To turn the extended storage fuse switch OFF, pull it up in direction as shown in the figure.
    • To turn the extended storage fuse switch ON, press it in direction as shown in the figure.
 
 
How To Remove Extended Storage Fuse Switch
Type A
  1. Turn the ignition switch OFF.
  2. Turn the extended storage fuse switch OFF.
  3. Press pawl and tilt to disengage the extended storage fuse switch. Press pawl and tilt to remove the extended storage fuse switch.
    cautionNever use fuse for bus bar.
    note
    • Extended storage fuse switch and bus bar are removed together. Remove bus bar from extended storage fuse switch, if necessary.
    • Install removed bus bar to fuse block.
    • Extended storage fuse switch is for transportation and storage. Reinstallation is not required after the removal.
Type B
  1. Turn the ignition switch OFF.
  2. Turn the extended storage fuse switch OFF.
  3. Hold and pull up the extended storage fuse switch hard in direction.
    cautionNever use fuse for bus bar.
    note
    • Extended storage fuse switch and bus bar may be removed together. Remove bus bar from extended storage fuse switch, if necessary.
    • Install removed bus bar to fuse block.
    • Extended storage fuse switch is for transportation and storage. Reinstallation is not required after the removal.
Type C
  1. Turn the ignition switch OFF.
  2. Turn the extended storage fuse switch OFF.
  3. Hold and pull up the extended storage fuse switch hard in direction.
    cautionNever use fuse for bus bar.
    note
    • Extended storage fuse switch and bus bar are removed together. Remove bus bar from extended storage fuse switch, if necessary.
    • Install removed bus bar to fuse block.
    • Extended storage fuse switch is for transportation and storage. Reinstallation is not required after the removal.