[Previous][Next]
Removal and Installation
 
 
REMOVAL
 
 
1. Disconnect the battery cable from the negative terminal.
2. Disengage the fixing pawls and then remove IPDM E/R cover A .
: Pawl
3. Disengage the fixing pawls and then pull up IPDM E/R .
: Pawl
4. Disconnect the IPDM E/R harness connector and then remove IPDM E/R from the vehicle.
 
 
INSTALLATION
Install in the reverse order of removal.
cautionBe sure to perform ADDITIONAL SERVICE WHEN REPLACING IPDM E/R when replacing IPDM E/R. Or not doing so, IPDM E/R control function does not operate normally. Refer to Description.