[Previous][Next]
Component Inspection (Rear Side Marker Light)
1.CHECK REAR SIDE MARKER LIGHT
  1. Ignition switch OFF.
  2. Disconnect rear combination light (body side) connector.
  3. Check resistance of rear combination light (body side) terminals.
    Rear combination light (body side)Resistance
    Terminal
    +–
    21Except 0 Ω
Is the inspection result normal?
INSPECTION END
.
 
2.CHECK REAR SIDE MARKER LIGHT BULB SOCKET
  1. Remove rear side marker light bulb.
  2. Check resistance of rear combination light (body side) terminals.
    Rear combination light (body side)Resistance
    Terminal
    +–
    21Except 0 Ω
Is the inspection result normal?
Replace the corresponding rear side marker light bulb. Refer to Removal and Installation.
Repair or replace the corresponding rear side marker light bulb socket or harness.