[Previous][Next]
Component Inspection (Tail Light)
1.CHECK TAIL LIGHT
  1. Ignition switch OFF.
  2. Disconnect each rear combination light connector.
  3. Check resistance of each rear combination light terminals.
    Body side
    Rear combination light (body side)Resistance
    Terminal
    +–
    21Except 0 Ω
    Power liftgate side
    Rear combination light (power liftgate side)Resistance
    Terminal
    +–
    65Except 0 Ω
Is the inspection result normal?
INSPECTION END
-1Body side: Replace the corresponding rear combination light (body side). Refer to Removal and Installation.
-2Power liftgate side: Replace the corresponding rear combination light (power liftgate side). Refer to Removal and Installation.