[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.M.U.T.-III SE screen terms
(Trouble diagnosis content)
DTC detection condition
B2CCF-04Passenger door mirror control moduleDiagnosis conditionIgnition switch is ON or OFF (auto ACC status).
Signal (terminal)LIN communication (door mirror) signal
ThresholdBCM detects communication error with passenger door mirror control module.
Diagnosis delay time1 second or less
 
 
POSSIBLE CAUSE
  • Passenger door mirror control module
  • LIN communication line
  • BCM
 
 
FAIL SAFE
—
 
 
1.PERFORM DTC CONFIRMATION PROCEDURE
With M.U.T.-III SE
  1. Ignition switch ON.
  2. Select “Self Diagnostic Result” mode of “BCM” using M.U.T.-III SE.
  3. Check DTC.
Is DTC detected?
Refer to Diagnosis Procedure.
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END