DOOR LOCK INDICATOR ROD STROKE CHECK
1. Measure the amount of protrusion from the door finisher at the lock position and the unlock position of the door lock indicator rod.
2. Check whether the difference between the amounts of protrusion (stroke) is within the standard value.Standard value:Front door: Approximately 12.3 mm (0.48 inch)
Rear door: Approximately 12.0 mm (0.47 inch)
3. If it is not within the standard value, check the door lock indicator rod, the door lock assembly and the door inside lock cable (rear only) and replace the defective parts.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)