[Previous][Next]
Removal and Installation
cautionAlways work with a helper.
 
 
REMOVAL
 
 
1. Tilt glass lid up.
2. Disengage fixing metal clips, and then remove side trim.
: Metal clip
3. Remove glass lid fixing screws .
4. Remove glass lid.
 
 
INSTALLATION
Note the following items, and then install in the reverse order of removal.
cautionAfter installing the glass lid, perform the leak test and check that there is no malfunction.
note
  • Before installation, tilt glass lid up so that secure work space.
  • After installation, carry out fitting adjustment. Refer to Adjustment.