[Previous][Next]
Diagnosis Procedure
1.CHECK FUSE
  1. Ignition switch OFF.
  2. Check that the following fuse is not blown (open).
    Fuse No.Current rating
    3115 A
Is the fuse blown (open)?
Repair the blown (open) fuse after repairing the affected circuit if a fuse is blown (open).
.
 
2.CHECK SUNSHADE MOTOR ASSEMBLY POWER SUPPLY
  1. Disconnect sunshade motor assembly connector.
  2. Ignition switch ON.
  3. Check voltage between sunshade motor assembly harness connector and ground.
    (+)(–)Voltage
    Sunshade motor assembly
    ConnectorTerminal
    R56Ground9 - 16 V
Is the inspection result normal?
.
Repair or replace harness.
 
3.CHECK SUNSHADE MOTOR ASSEMBLY GROUND CIRCUIT
Check continuity between sunshade motor assembly harness connector and ground.
Sunshade motor assemblyContinuity
ConnectorTerminal
R51GroundExisted
Is the inspection result normal?
INSPECTION END
Repair or replace harness.