[Previous][Next]
Component Inspection
1.CHECK SUNROOF SWITCH
  1. Ignition switch OFF.
  2. Disconnect sunroof switch assembly connector.
  3. Check continuity sunroof switch assembly terminals under the following conditions.
    TerminalsConditionContinuity
    910Sunroof switch OPENExisted
    Other than aboveNot existed
    8Sunroof switch CLOSEExisted
    Other than aboveNot existed
    2Sunroof switch PUSHExisted
    Other than aboveNot existed
Is the inspection result normal?
INSPECTION END
Replace sunroof switch assembly. Refer to Removal and Installation.