[Previous][Next]
Work Procedure
1.STEP 1
  1. Close the door.
  2. Ignition switch ON.
  3. Continue pulling the power window switch UP until glass stops at fully closed position then release the switch. *1
  4. Keep pulling the switch for 5 seconds or more. *2
  5. Continue pressing the power window switch DOWN until glass stops then release the switch.
  6. Keep pressing the switch for 5 seconds or more. *2
    After glass moves again, keep pressing the switch until glass reaches the fully open position.
  7. Continue pulling the power window switch UP (MANUAL-UP operation) until glass stops at fully closed position.
  8. Check that AUTO-UP function operates normally.
note *1: If the power window stops before reaching the fully closed position: After the power window stops, release the switch then continue pulling the switch UP again and move the power window to the fully closed position.
*2: After keep pulling or pressing 5 seconds or more, glass moves again.
: .
 
2.STEP 2
Check anti-pinch function. Refer to Description.
: END