[Previous][Next]
Diagnosis Procedure
1.CHECK POWER WINDOW MAIN SWITCH CIRCUIT
  1. Ignition switch OFF, and then wait for 3 minutes with driver door open.
    note
    • Even after ignition switch is OFF, power is supplied to accessories for a certain amount of timer by the AUTO ACC function.
    • When vehicle is operate while on standby, power may be supplied to accessories.
  2. Disconnect front power window motor (driver side) connector and power window main switch connector.
  3. Check continuity between front power window motor (driver side) harness connector and ground.
    Front power window motor (driver side)Continuity
    ConnectorTerminal
    D101GroundNot existed
Is the inspection result normal?
INSPECTION END
Repair or replace harness.