[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.M.U.T.-III SE screen items
(Trouble diagnosis content)
DTC detecting condition
B2043–4AElectric shift ID discord
(Electric shift identification discord)
Diagnosis conditionWhen registering electric shift control module
Signal (terminal)CAN communication signal
ThresholdElectric shift control module registration has not been completed normally
Diagnosis delay time1 second or less
 
 
POSSIBLE CAUSE
Improper electric shift control module registration operation
 
 
FAIL-SAFE
Prohibit shifting the shift selector from P position
 
 
CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
  1. Ignition switch ON.
  2. Check DTC in “Self Diagnostic Result” mode of “HANDS FREE MODULE” using M.U.T.-III SE.
Is DTC detected?
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END