[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.M.U.T.-III SE screen items
(Trouble diagnosis content)
DTC detecting condition
P161F-00IMMOBILIZER
(Immobilizer)
Diagnosis conditionIgnition switch ON
Signal (terminal)—
ThresholdWhen kye registration has not been completed normally after replacing Keyless operation key unit.
Diagnosis delay time1 second or less
 
 
POSSIBLE CAUSE
  • Improper key registration operation
  • EPS control unit
  • Keyless operation key unit
  • Electric shift control module
 
 
FAIL-SAFE
Inhibit engine cranking
 
 
CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
  1. Ignition switch ON.
  2. Select “Self Diagnostic Result” mode of “ENGINE” using M.U.T.-III SE.
Is the DTC detected?
Refer to DTC Diagnosis Procedure.
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END