[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.M.U.T.-III SE screen items
(Trouble diagnosis content)
DTC Detection Condition
B2F06-15Power liftgate/trunk opener switch
(Power liftgate/trunk opener switch)
Diagnosis condition Ignition switch ON.
Signal (terminal)Power liftgate opener switch signal (BCM connector terminal: 98)
ThresholdWhen the BCM detects power liftgate opener switch circuit is short to ground or open
Diagnosis delay time1 second or less
 
 
POSSIBLE CAUSE
  • Power liftgate opener switch
  • Harness or connectors (power liftgate opener switch circuit is short to ground or open)
  • BCM
 
 
FAIL-SAFE
—
 
 
DTC CONFIRMATION PROCEDURE
1.CHECK SELF-DIAG RESULT
With M.U.T.-III SE
  1. Ignition switch ON.
  2. Check “Self Diagnostic Result” mode of “BCM” using M.U.T.-III SE.
Is DTC detected?
Refer to DTC Diagnosis ProcedureDiagnosis Procedure.
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END