[Previous][Next]
Work Procedure
1. CHOOSE METHOD
There are two ways of setting method.
Which method do you choose?
: .
: .
 
2. WITH INFORMATION DISPLAY
  1. Ignition switch ON.
  2. Select "Exit Seat Slide" in "Driving Position" of “Vehicle settings” of "Settings" using information display to change between ON and OFF.
:
 
3. WITH SET SWITCH
  1. Ignition switch OFF.
  2. Push setting button and hold for more than 10 seconds.
:
 
4.CONFIRM THE OPERATION
Check the entry/exit assist function setting is changed.
Is the setting changed?
END