Keyless operation key Interlock Storage Procedure
Performing the following operation associates the registered driving position with Keyless operation key. When driver door unlock operation is performed by Keyless operation key or driver door request switch, display of the registered driving position and turnout operation can be performed.
1.STEP 1
Check the following conditions.- Ignition switch : OFF
- Driving position : Registered
- All door: Locked
: 
.
2.STEP 2
- Push set switch.
| note | Memory indicator for which driver seat position is already retained in memory is illuminated for 5 seconds. |
- Push the Keyless operation key unlock button within 5 seconds after pushing memory switch (while the memory indicator is turned ON).
| note | From the time registration is performed, the applicable memory indicator blinks for 5 seconds. |
: .
3.STEP 3
Confirm the operation of each part with memory operation and Keyless operation key interlock operation. : END
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)