[Previous][Next]
Work Procedure
 
 
Memory Storage Procedure
Two positions for the driver seat and outside mirror can be stored for memory operation by following procedure.
noteMemory registration can be performed with no restrictions of the shift position, vehicle speed, and ignition switch position.
1.REGISTRATION METHOD
  1. Adjust driver seat and outside mirror position manually.
  2. Push set switch.
    note
    • Memory indicator for which driver seat position is already retained in memory is illuminated for 5 seconds.
    • Memory indicator for which driver seat position is not retained in memory is illuminated for 0.5 second.
  3. Push the memory switch (1 or 2) for at least 1 second within 5 seconds after pushing the set switch.
    note
    • When registration is performed correctly, the memory indicator blinks for 5 seconds and a warning buzzer sounds.
    • If memory is stored in the same memory switch, the previous memory will be deleted.
  4. Confirm the operation of each part with memory operation.
: END