Component | Function | |
BCM | Recognizes the following status and transmits it to driver seat control unit via CAN communication.
| |
TCM | TCM transmits the shift position signal to driver seat control unit via CAN communication. | |
ABS actuator and electric unit (control unit) | ABS actuator and electric unit (control unit) transmits the vehicle speed signal to driver seat control unit via CAN communication. | |
AV control unit | Keyless operation key interlock function can be set on the navigation display. | |
Driver seat control unit | Refer to Driver Seat Control Unit. |
note | When ignition switch signal turns ON during return operation, the operation is interrupted, ignition switch signal turns from ON to OFF, and operation restarts. |
Item | Request status |
Ignition switch position | OFF |
Log-in function setting registration | Registered |
Switch inputs
| OFF (Not operated) |
M.U.T.-III SE | Not connected |
Vehicle speed | 0 km/h (0 MPH) |
Order | Input | Output | Control unit condition |
1 |
| — | When the following function is performed, the driver seat control unit receives the door lock status signal and Key ID signal from BCM via CAN communication.
|
2 | — | — | Driver seat control unit performs the seat slide move directly to the exit assist function. Other loads move to the exit assist function after performing log-in function. |
3 | — | — | Driver seat control unit performs the entry assist function. |