[Previous][Next]
Rear Air Control
 
 
COMPONENT FUNCTION WITHIN SYSTEM
  • The rear air control is activated by LIN communication with the A/C amp., and can set the rear temperature.
  • The rear air conditioning operating status is indicated on the display located on the control.
 
 
INDIVIDUAL COMPONENT FUNCTION
  • The conditions that are set for the rear air control that is operated by temperature switch are transmitted to the A/C amp. via LIN communication.
  • The operating status of the air conditioning is transmitted from the A/C amp. via LIN communication.
 
 
COMPONENT OPERATION
  • The operation status of each switch is detected by the control and is transmitted as an operation signal to the A/C amp. via LIN communication.
  • The following switch specification control was adopted.
    • Temperature control: Push-return type
    noteRegarding the push switches: Refer to the following for the differences between push-lock types and push-return types.
    OperationPush-lock typePush-return type
    Switch ON operation
    Switch OFF operation
    Push-lock type
    • Switch ON operation: At the time of switch ON operation, the switch is pushed from the reference point to the pushed position , and the switch turns ON. When the switch is released from this position, the switch returns from the pushed position to the hold position , and the switch position is held there.
    • Switch OFF operation: At the time of the switch OFF operation, the switch is pushed from the hold position to the pushed position . When the switch is released from this position, the switch returns from the pushed position to the reference point , and the switch turns OFF.
    Push-return type
    • Switch ON operation: At the time of the switch ON operation, the switch is pushed from the reference point to the pushed position , and the switch turns ON. When the switch is released from this position, the switch returns from the pushed position to the reference point .
    • Switch OFF operation: At the time of the switch OFF operation, the switch is pushed from the reference point to the pushed position , and the switch turns OFF. When the switch is released from this position, the switch returns from the pushed position to the reference point .
  • For the name and function of each switch. Refer to Switch Name and Function.
 
 
COMPONENT PARTS LOCATION
The rear air control is installed to the console rear finisher.