[Previous][Next]
Diagnosis Procedure
1.PERFORM SELF DIAGNOSTIC RESULT
With M.U.T.-III SE
  1. Ignition switch ON.
  2. Select “Self Diagnostic Result” mode of “HVAC” with M.U.T.-III SE.
  3. Touch "Erase DTCs".
  4. Ignition switch OFF.
  5. Ignition switch ON.
  6. Perform “DTC CONFIRMATION PROCEDURE”. Refer to DTC Description.
Is DTC detected again?
Replace rear air control. Refer to REAR A/C CONTROLLER ASSEMBLY REMOVAL AND INSTALLATION.
INSPECTION END