[Previous][Next]
Diagnosis Procedure
1.PERFORM SELF DIAGNOSTIC RESULT
With M.U.T.-III SE
  1. Ignition switch ON.
  2. Select “Self Diagnostic Result” mode of “HVAC” with M.U.T.-III SE.
  3. Touch "Erase DTCs"
  4. Ignition switch OFF.
  5. Ignition switch ON.
  6. Perform “DTC CONFIRMATION PROCEDURE”. Refer to DTC Description.
Is DTC detected again?
Replace A/C switch assembly. Refer to A/C CONTROLLER ASSEMBLY REMOVAL AND INSTALLATION.
INSPECTION END