[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.M.U.T.-III SE screen items
(Trouble diagnosis content)
DTC Detection Condition
B12BA-97Air bag disposal completion
(Air bag disposal completion)
Diagnosis conditionWhen ignition switch is ON.
Signal (terminal)Disposal deployment detection signal
ThresholdReuse of air bag diagnosis sensor unit
Diagnosis delay time2 seconds or more.
 
 
POSSIBLE CAUSE
Reuse of air bag diagnosis sensor unit after disposal deployment
 
 
FAIL-SAFE
 
 
DTC CONFIRMATION PROCEDURE
1.CHECK SELF-DIAG RESULT
With M.U.T.-III SE
  1. Ignition switch ON.
  2. Perform “Self Diagnostic Result” mode of “AIR BAG” using M.U.T.-III SE.
Is malfunctioning part detected?
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END