[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
noteThis DTC cannot be erased.
DTC No.M.U.T.-III SE screen items
(Trouble diagnosis content)
DTC Detection Condition
B12B5-97Frontal collision
(Frontal collision)
Diagnosis conditionWhen ignition switch is ON.
Signal (terminal)Collision signal
ThresholdFrontal collision detected
Diagnosis delay time2 seconds or more.
 
 
POSSIBLE CAUSE
Frontal collision
 
 
FAIL-SAFE
 
 
DTC CONFIRMATION PROCEDURE
1.CHECK SELF-DIAG RESULT
With M.U.T.-III SE
  1. Ignition switch ON.
  2. Perform “Self Diagnostic Result” mode of “AIR BAG” using M.U.T.-III SE.
Is malfunctioning part detected?
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END