[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.M.U.T.-III SE screen items
(Trouble diagnosis content)
DTC Detection Condition
B1041-82Vehicle speed signal
(Vehicle speed signal)
Diagnosis conditionWhen ignition switch is ON.
Signal (terminal)CAN communication signal
ThresholdError signal that is received from ABS actuator and electric unit (control unit)
Diagnosis delay time2 seconds or more.
 
 
POSSIBLE CAUSE
  • ABS actuator and electric unit (control unit)
  • Air bag diagnosis sensor unit
 
 
FAIL-SAFE
—
 
 
DTC CONFIRMATION PROCEDURE
1.CHECK DTC PRIORITY
If DTC B1041-82 is displayed with Network-DTC, first perform the trouble diagnosis for Network-DTC.
Is applicable DTC detected?
Perform diagnosis of applicable. Refer to DTC IndexDTC Index.
.
 
2.CHECK SELF-DIAG RESULT
With M.U.T.-III SE
  1. Ignition switch ON.
  2. Perform “Self Diagnostic Result” mode of “AIR BAG” using M.U.T.-III SE.
Is malfunctioning part detected?
Refer to Diagnosis Procedure.
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END