[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.M.U.T.-III SE screen items
(Trouble diagnosis content)
DTC Detection Condition
B1000-55Air bag diagnosis sensor unit
(Air bag diagnosis sensor unit)
Diagnosis conditionWhen ignition switch is ON.
Signal (terminal)
ThresholdWhen no data are stored in the air bag diagnosis sensor unit
Diagnosis delay time2 seconds or more.
 
 
POSSIBLE CAUSE
Incomplete of configuration for air bag diagnosis sensor unit
 
 
FAIL-SAFE
 
 
DTC CONFIRMATION PROCEDURE
1.CHECK SELF-DIAG RESULT
With M.U.T.-III SE
  1. Ignition switch ON.
  2. Perform “Self Diagnostic Result” mode of “AIR BAG” using M.U.T.-III SE.
Is malfunctioning part detected?
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END