[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.M.U.T.-III SE screen items
(Trouble diagnosis content)
DTC Detection Condition
B00A0–88OCCUPANT SENS UNIT
(Occupant Classification System)
Diagnosis conditionWhen Ignition switch is ON.
Signal (terminal)Occupant detection system control unit signal
Threshold
  • Communication malfunction of occupant detection system control unit
  • Communication blank of occupant detection system control unit
Diagnosis delay time5 seconds or more.
 
 
POSSIBLE CAUSE
  • Connection malfunction or open circuit of harness and connector
  • Internal malfunction of occupant detection system control unit
  • Internal malfunction of air bag diagnosis sensor unit
 
 
FAIL-SAFE
—
 
 
DTC CONFIRMATION PROCEDURE
1.CHECK SELF-DIAG RESULT
With M.U.T.-III SE
  1. Ignition switch ON and wait for 5 seconds or more.
  2. Perform “Self Diagnostic Result” mode of “AIR BAG” using M.U.T.-III SE.
Is malfunctioning part detected?
Refer to Diagnosis Procedure.
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END