[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.M.U.T.-III SE screen items
(Trouble diagnosis content)
DTC Detection Condition
B0002-1BDRIVER AIRBAG MODULE 2
(Driver Frontal Stage 2 Deployment Control)
Diagnosis conditionWhen ignition switch is ON.
Signal (terminal)Driver air bag module signal
ThresholdDriver air bag module circuit resistance is above threshold
(including the spiral cable)
Diagnosis delay time2 seconds or more.
 
 
POSSIBLE CAUSE
  • Connection malfunction of harness and connector
  • Internal malfunction of driver air bag module
  • Internal malfunction of air bag diagnosis sensor unit
 
 
FAIL-SAFE
—
 
 
DTC CONFIRMATION PROCEDURE
1.CHECK SELF-DIAG RESULT
With M.U.T.-III SE
  1. Ignition switch ON.
  2. Perform “Self Diagnostic Result” mode of “AIR BAG” using M.U.T.-III SE.
Is malfunctioning part detected?
Refer to Diagnosis Procedure.
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END