[Previous][Next]
Description
Zero point reset is an initializing procedure for occupant detection system sensor that must be performed when replacing or removing and installing passenger seat.
If zero point reset is not performed, the initialization is incomplete and Occupant Detection System does not operate normally. Refer to Work Procedure.
note
  • When replacing passenger seat with a Mitsubishi Motors genuine part, SRS air bag warning light turns ON if zero point reset is incomplete.
  • When zero point reset is performed once after removal and installation of passenger seat, M.U.T.-III SE displays “Already performed” and SRS air bag warning light does not ON.
  • When reinstalling passenger seat after removal, the initial value for occupant detection system sensor changes, and Occupant Detection System does not operate normally.
  • Always perform zero point reset after performing the work as per the following.
    • Reinstallation of passenger seat
    • Replacement of passenger seat with a seat that is zero point reset complete.