[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.M.U.T.-III SE screen items (Trouble diagnosis content)DTC detecting condition
B2F60-55Seat belt buckle switch (driver side)
[Seat belt buckle switch (driver side)]
Diagnosis conditionIgnition switch ON
Signal (terminal)—
ThresholdConfiguration of the BCM is not completed
Diagnosis delay time1 second or less
 
 
POSSIBLE CAUSE
BCM is not configured
 
 
FAIL-SAFE
—
 
 
DTC CONFIRMATION PROCEDURE
1.CHECK SELF-DIAG RESULT
With M.U.T.-III SE
  1. Ignition switch ON.
  2. Check “Self Diagnostic Result” mode of “BCM” using M.U.T.-III SE.
Is DTC detected?
Refer to DTC Diagnosis Procedure.
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END