[Previous][Next]
Removal and Installation
warningBe sure to check precautions and notes by referring to PRECAUTIONS for SRS AIRBAG (Refer to SRS Airbag - PrecautionsPrecaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER") and Removal and Installation of SPIRAL CABLE (Refer to Spiral Cable - Removal and installationRemoval and Installation) before work.
caution
  • After the installation, perform a steering torque sensor calibration (Refer to STEERING CONTROL SYSTEM - BASIC INSPECTION - STEERING TORQUE SENSOR CALIBRATIONDiagnosis Procedure.)
  • After the installation, perform steering torque calibration <Vehicles with ADAPTIVE CRUISE CONTROL SYSTEM (ACC)> (Refer to DRIVER ASSISTANCE SYSTEM - ADAS CONTROL UNIT - BASIC INSPECTION - STEERING TORQUE CALIBRATIONWork Procedure.)
Pre-removal Operation
  • Steering Wheel Straight-ahead Position Check
  • Driver's Air Bag Module Removal (Refer to Driver's Air Bag ModuleRemoval and Installation)
Post-installation Operation
  • Driver's Air Bag Module Installation (Refer to Driver's Air Bag ModuleRemoval and Installation)
  • Steering Wheel Straight-ahead Position Check
  • Steering Wheel Shake Check
 
 
Removal steps
1.Steering switch assembly (LH)
2.Steering switch assembly (RH)
3.Steering wheel bolt
4.Steering wheel assembly
5.Steering wheel back shell
6.Paddle shifter switch (LH)
7.Paddle shifter switch (RH)
8.Steering wheel
 
 
REMOVAL SERVICE POINT
 
 
<<A>> STEERING WHEEL ASSEMBLY REMOVAL
1.
cautionUse the special tool to remove the steering wheel since the steering column collision adsorbing mechanism may be damaged.
Position the steering wheel in a straight ahead position.
2. Do not remove the steering wheel bolt. Only loosen the bolt.
3. Install the special tool steering wheel puller (MB990803) to the steering wheel assembly.
4. In order to avoid damage to the steering wheel bolt, insert a washer between the steering wheel bolt and the bolt of the special tool steering wheel puller (MB990803). Then, tighten the bolt of the special tool steering wheel puller (MB990803) and remove the steering wheel assembly.