Diagnosis Procedure

1.PERFORM SELF-DIAGNOSIS (1)

With M.U.T.-III SE

Erase self-diagnosis result for “ABS”.
After approximately 1 minute, operate (pull and push) parking brake switch.
caution
Set the electric shift selector in the P position.
Depress the brake pedal
Perform self-diagnosis for “ABS”.

Is DTC “C10B4-98” detected?

Check when parking brake actuator is stuck.

2.PERFORM SELF-DIAGNOSIS (2)

With M.U.T.-III SE

Operate and release the parking brake five times.
caution
Set the electric shift selector in the P position.
Depress the brake pedal
Perform self-diagnosis for “EHS/PKB”.

Is DTC “C10B4-98” detected?

-1"CRNT" is displayed: Replace the ABS actuator and electric unit (control unit). Refer to Removal and Installation

-2“Stored DTC” is displayed: INSPECTION END (Erase the memory of self-diagnosis results.)

INSPECTION END