[Previous][Next]
Diagnosis Procedure
1.PERFORM SELF-DIAGNOSIS
With M.U.T.-III SE
  1. Ignition switch OFF (Auto ACC function OFF).
  2. Ignition switch ON.
  3. Operate parking brake switch (apply/release) five times.
  4. Ignition switch OFF (Auto ACC function OFF).
  5. Ignition switch ON.
    cautionBe sure wait of 10 seconds after ignition switch ON.
  6. Perform self-diagnosis for “ABS”.
Is DTC “C10B3-44” detected?
-1"CRNT" is displayed: Replace the ABS actuator and electric unit (control unit). Refer to Removal and Installation.
-2“Stored DTC” is displayed: INSPECTION END (Erase the memory of self-diagnosis results.)
INSPECTION END