[Previous][Next]
Diagnosis Procedure
1.PROGRAMMING OF ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
Perform programming of ABS actuator and electric unit (control unit). Refer to Work Procedure.
cautionDo not replace the ABS actuator and electric unit (control unit) until self-diagnosis has been completed.
: .
 
2.CHECK SELF-DIAGNOSIS
With M.U.T.-III SE
Replace the ABS actuator and electric unit (control unit) even if other DTCs are displayed along with “C107C-53” in self-diagnosis for “ABS”.
: Replace the ABS actuator and electric unit (control unit). Refer to Removal and Installation.