[Previous][Next]
Diagnosis Procedure
1.CALIBRATION OF DECEL G SENSOR
Perform calibration of decel G sensor. Refer to Work Procedure.
: .
 
2.PERFORM SELF-DIAGNOSIS
With M.U.T.-III SE
  1. Ignition switch OFF (Auto ACC function OFF).
  2. Start the engine.
    noteWait at least 10 seconds after starting the engine.
  3. Perform self-diagnosis for “ABS”.
Is DTC “C1071-54” detected?
Replace the ABS actuator and electric unit (control unit). Refer to Removal and Installation.
INSPECTION END