Diagnosis Procedure
1.
CALIBRATION OF SIDE G SENSOR
Perform calibration of side G sensor. Refer to
Work Procedure
.
:
.
2.
PERFORM SELF-DIAGNOSIS
With M.U.T.-III SE
Ignition switch OFF (Auto ACC function OFF).
Start the engine.
note
Wait at least 10 seconds after starting the engine.
Perform self-diagnosis for “ABS”.
Is DTC “C1070-54” detected?
Replace the ABS actuator and electric unit (control unit). Refer to
Removal and Installation
.
INSPECTION END
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
With M.U.T.-III SE
Replace the ABS actuator and electric unit (control unit). Refer to Removal and Installation
.
INSPECTION END