Component | Signal description |
BCM | Mainly transmits the following signals to combination meter via CAN communication.
Mainly receives the following signals from ABS actuator and electric unit (control unit) via CAN communication.
Mainly transmits the following signals to IPDM E/R via CAN communication.
Mainly receives the following signals from TCM via CAN communication.
|
Combination meter | Mainly receives the following signals from BCM via CAN communication.
|
ABS actuator and electric unit (control unit) | Mainly transmits the following signals to BCM via CAN communication.
|
TCM | Mainly transmits the following signals to BCM via CAN communication.
|
IPDM E/R | Mainly receives the following signals from BCM via CAN communication.
|
Condition | Low tire pressure warning light | Information display |
Ignition switch OFF | OFF | OFF |
Ignition switch ON (system normal) | ON for 1 second then turns OFF | No TPMS message |
Low tire pressure | ON | Low Tire Pressure Warning |
Configuration not performed in tire pressure monitoring system | Blinks for 1 minute then stays ON | No TPMS message |
Tire pressure sensor ID not registered in BCM | ||
Tire pressure monitoring system malfunction |