Wheel Alignment

Item			Standard
Camber Degree minute (Decimal degree)		Minimum	–1° 10′ (–1.17°)
		Nominal	–0° 25′ (–0.42°)
		Maximum	0° 20′ (0.33°)
		Left and right difference^*1	[–0°33′ (–0.55°)] - [0° 33′ (0.55°)]
Caster Degree minute (Decimal degree)		Minimum	4° 54′ (4.90°)
		Nominal	5° 39′ (5.65°)
		Maximum	6° 24′ (6.40°)
		Left and right difference^*1	[–0° 30′ (–0.50°)] - [0° 30′ (0.50°)]
Kingpin inclination Degree minute (Decimal degree)		Minimum	10° 29′ (10.48°)
		Nominal	11° 14′ (11.23°)
		Maximum	11° 59′ (11.98°)
Toe-in	Total toe-in Distance	Minimum	In 0.3 mm (In 0.012 in)
		Nominal	In 2.8 mm (In 0.110 in)
		Maximum	In 5.3 mm (In 0.21 in)
	Total toe-angle Degree minute (Decimal degree)	Minimum	In 0° 1′ (In 0.02°)
		Nominal	In 0° 13′ (In 0.22°)
		Maximum	In 0° 25′ (In 0.42°)

Measure value under unladen*² conditions.

*1: A difference when assuming the left side a standard.

*2: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.