[Previous][Next]
Inspection
 
 
COMPONENT PART
Make sure that the mounting conditions (looseness, backlash) of each component and component conditions (wear, damage) are normal.
 
 
WHEEL HUB ASSEMBLY (BEARING-INTEGRATED TYPE)
Check the following items, and replace the part if necessary.
  • Move wheel hub and bearing assembly in the axial direction by hand. Check there is no looseness of wheel bearing.
    Axial end play: Refer to Wheel Bearing.
  • Rotate wheel hub and make sure there is no unusual noise or other irregular conditions. If there is any of irregular conditions, replace wheel hub and bearing assembly.