| Companion flange lock nut | | Companion flange | | Electro-hydraulic coupling oil seal |
| Electro-hydraulic coupling assembly | | O-ring | | Actuator assembly |
| O-ring | | Drive pinion oil seal | | Drive pinion lock nut |
| Pinion front bearing | | Gasket | | Drain plug |
| Filler plug | | Coupling oil tank cover | | Filler plug |
| Gear carrier | | Collapsible spacer | | Drive pinion adjusting shim |
| Pinion rear bearing | | Drive pinion | | Drive gear |
| Differential case | | Side bearing | | Side bearing adjusting shim |
| Side oil seal | | Rear cover | | Stud bolt |
| Pinion mate thrust washer | | Pinion mate gear | | Side gear thrust washer |
| Side gear | | Pinion mate shaft | | Lock pin |
| Outer circumference | | Screw hole | | |
: N·m (kg-m, in-lb) |
: N·m (kg-m, ft-lb) |
: Always replace after every disassembly. |
: Select with proper thickness. |
1: Apply gear oil. |
2: Apply electro-hydraulic coupling oil (Genuine part). |
*: Apply anti-corrosion oil. |
: Apply Genuine Silicone RTV or equivalent. Refer to Recommended Chemical Products and SealantsRecommended Chemical Products and Sealants. |
: Apply Genuine High Strength Thread Locking Sealant or equivalent. Refer to Recommended Chemical Products and SealantsRecommended Chemical Products and Sealants. |