[Previous][Next]
Inspection
 
 
INSPECTION AFTER DISASSEMBLY
 
 
Bearing
  • If unusual noise from the bearing is observed, replace electro-hydraulic coupling assembly.
 
 
Oil Seal
  • Whenever disassembled, replace.
  • If wear, deterioration of adherence (sealing force lips), or damage is detected on the lips, replace them.
 
 
Companion Flange
  • Whenever disassembled, replace.
  • If any chipped mark [about 0.1 mm, (0.004 in)] or other damage on the contact sides of the lips of the companion flange is found, replace.