[Previous][Next]
Inspection
 
 
OIL LEAKAGE
Make sure that oil is not leaking from final drive assembly or around it.
 
 
OIL LEVEL
 
 
1. Check oil level from filler plug mounting hole as shown in the figure after removing filler plug and gasket from final drive assembly.
: Vehicle front
cautionTurn the ignition switch OFF while checking oil level.
  • Oil level should be level with bottom of filler plug mounting hole. Add gear oil if necessary. Refer to Refilling.
2. Set a gasket on filler plug and install it on final drive assembly.
cautionNever reuse gasket.
3. Tighten filler plug to the specified torque. Refer to Exploded View.