[Previous][Next]
Inspection
 
 
INSPECTION AFTER DISASSEMBLY
Check items below. If necessary, replace them with new ones.
 
 
Gear and Shaft
Check gear face and shaft for wear, cracks, damage, and seizure.
cautionReplace ring gear and drive pinion as a set (hypoid gear set) if any malfunction is detected on the ring gear or drive pinion.
 
 
Bearing
Check for seizure, peeling, wear, corrosion, sticking, unusual noise, roughness in hand turning, and other damage.
 
 
Shim
Check for seizure, damage, and unusual wear.