INSPECTION AFTER DISASSEMBLY
Check items below. If necessary, replace them with new ones.
Gear and Shaft
Check gear face and shaft for wear, cracks, damage, and seizure.
| caution | If malfunction is detected on the ring gear or drive pinion, replace the ring gear and drive pinion as a set. |
Bearing
Check for seizure, peeling, wear, corrosion, sticking, unusual noise, roughness in hand turning, and other damage.
| caution | When replacing the bearing, always replace the inner race and outer race as a pair. |
Shim
Check for seizure, damage, and unusual wear.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)