[Previous][Next]
Removal and Installation
 
 
REMOVAL
noteWhen removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spilling.
 
 
1. Remove air cleaner cover and air cleaner body. Refer to Removal and Installation.
2. Remove engine under cover. Refer to Exploded View.
3. Release hose clamps.
4. Remove CVT fluid cooler hose A and CVT fluid cooler hose B from radiator.
5. Remove CVT fluid cooler hose A and CVT fluid cooler hose B from CVT oil warmer.
 
 
INSTALLATION
Note the following, and install in the reverse order of removal.
caution
  • Never reuse hose clamps.
  • Hose clamps should not interfere with the spool or bulge.
*Refer to the following when installing CVT fluid cooler hoses
Hose name (1)Installation side tube (2)Direction of paint markHose insertion depth (L)
CVT fluid cooler hose ACVT oil warmerMarking of the CVT oil warmer: End reaches the CVT oil warmer.
RadiatorLeftward: End reaches the radiator.
CVT fluid cooler hose BRadiatorLeftward
CVT oil warmerFrontward: End reaches the 2–step bulge
*Refer to the following when installing hose clamps
Hose name (1)Installation side tube (2)Hose clamp (3)
Direction of tabClamping position (A)
CVT fluid cooler hose ACVT oil warmerMarking of the CVT oil warmer2 - 5 mm (0.08 - 0.20 in) from hose end
RadiatorLeftward
CVT fluid cooler hose BCVT oil warmerFrontward
RadiatorLeftward
Adjust the CVT fluid level. Refer to Adjustment.