[Previous][Next]
Removal and Installation
 
 
REMOVAL
 
 
1. Disconnect the negative battery terminal. Refer to Exploded View.
2. Remove front fender protector side cover (LH). Refer to Exploded View.
3. Disconnect the harness connector from the primary speed sensor.
4. Remove primary speed sensor.
cautionNever impact primary speed sensor.
5. Remove the O-ring from the primary speed sensor.
 
 
INSTALLATION
Installation is in the reverse order of removal.
caution
  • Never reuse O-ring.
  • Apply CVT fluid to the O-ring.