[Previous][Next]
Component Inspection (Motor Coil A)
1.CHECK MOTOR COIL A
noteIf the electric shift selector is shifted before disconnecting the shift actuator connector, wait at least 5 minutes.
  1. Disconnect the shift actuator connector.
  2. Check the resistance between shift actuator connector terminals.
    Shift actuatorConditionResistance
    Motor coilTerminal
    A56Coil temperature: 20°C (68°F)2.3 – 2.8 Ω
    7
    8
Is the inspection result normal?
INSPECTION END
Replace the transaxle assembly due to malfunction in the motor coil A (shift actuator). Refer to Remove and InstallationRemoval and Installation.