Component Inspection (Shift Actuator Relay B)
1.
CHECK SHIFT ACTUATOR RELAY B
Disconnect the shift actuator relay B. Refer to
Component Parts Location
.
Apply 12 V direct current between shift actuator relay B terminals 3 and 4.
caution
Never make the terminals short.
Connect the fuse between the terminals when applying the voltage.
Check the continuity between shift actuator relay B terminals 1 and 2.
Shift actuator relay B
Condition
Continuity
Terminal
1
2
Apply 12 V direct current between terminals 3 and 4.
Existed
Does not apply 12 V direct current between terminals 3 and 4.
Not existed
Is the inspection result normal?
INSPECTION END
Replace the shift actuator relay B.