Component Inspection (Shift Actuator Relay B)
1.
CHECK SHIFT ACTUATOR RELAY B
Disconnect the shift actuator relay. Refer to
Component Parts Location
.
Apply 12 V direct current between shift actuator relay terminals 3 and 4.
caution
Never make the terminals short.
Connect the fuse between the terminals when applying the voltage.
Check the continuity between shift actuator relay terminals 1 and 2.
Shift actuator relay
Condition
Continuity
Terminal
1
2
Apply 12 V direct current between terminals 3 and 4.
Existed
Does not apply 12 V direct current between terminals 3 and 4.
Not existed
Is the inspection result normal?
INSPECTION END
Replace the shift actuator relay.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
.
INSPECTION END
Replace the shift actuator relay.