[Previous][Next]
Component Inspection (Shift Actuator Relay A)
1.CHECK SHIFT ACTUATOR RELAY A
  1. Disconnect the shift actuator relay A. Refer to Component Parts Location.
  2. Apply 12 V direct current between shift actuator relay A terminals 8 and 9.
    caution
    • Never make the terminals short.
    • Connect the fuse between the terminals when applying the voltage.
  3. Check the continuity between shift actuator relay A terminals 6 and 7.
    Shift actuator relay AConditionContinuity
    Terminal
    67Apply 12 V direct current between terminals 8 and 9.Existed
    Does not apply 12 V direct current between terminals 8 and 9.Not existed
Is the inspection result normal?
INSPECTION END
Replace the shift actuator relay A.