[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTCM.U.T.-III SE screen terms
(Trouble diagnosis content)
DTC detection condition
P17F207CVT JUDDER (T/C INSPECTION)
[CVT Judder (Torque Converter Inspection)]
Diagnosis condition
Signal
ThresholdMalfunction in torque converter
Diagnosis delay time
 
 
POSSIBLE CAUSE
Torque converter
 
 
FAIL-SAFE
Not changed from normal driving
 
 
DTC CONFIRMATION PROCEDURE
cautionAlways drive vehicle at a safe speed.
1.CHECK DTC DETECTION
  1. Start the engine.
  2. With the accelerator pedal position 1/8, accelerate the vehicle from 0 km/h (0 MPH) to 50 km/h (31 MPH).
  3. Drive the vehicle at 50 km/h (31 MPH) constant speed for 15 seconds.
  4. Stop the vehicle with a brake force which allows the vehicle to stop in 10 to 20 seconds.
  5. Repeat steps 2 to 4 above 5 times.
  6. Check the DTC.
Is "P17F2–07" detected?
Go to Diagnosis ProcedureDTC Diagnosis Procedure.
Inspection End.